PET Backing Glossy Crystal Morganite Red Car Vinyl Wrap Film D0904

WRAPMASTER provides a new series of high-quality vinyl in various colors and textures. Each roll size is 1.52*17 meters, which is enough for a private car.

Super Glossy Crystal Morganite Red Car Vinyl Wrap Film is a 3-layer and high-gloss film. The surface is glossier than ordinary glossy vinyl, and the PET lining provides a durable protective layer; Henkel’s solvent-based acrylic adhesive has the characteristics of low viscosity and high-density air guide grooves; the film can be used for 3-5 years; it can be used to complete the vehicle, can be partially covered (body, roof, hood, tail, rearview mirror, interior)

PET Backing Glossy Crystal Morganite Red Car Vinyl Wrap Film uses advanced polymeric vinyl plastic technology and a new PET double-layer lamination process. Its unique ultra-bright crystal surface treatment technology gives your car body a very high gloss while keeping the surface smooth without any orange peel effect. Morganite Red’s brilliant luster is like a gem, representing vitality, enthusiasm and nobility, adding a unique and gorgeous color to your car.

This Morganite Red Car Vinyl Wrap Film has excellent weather resistance and can withstand harsh weather such as sun and rain, while maintaining a long-lasting beautiful effect. The installation is simple. Compared with spray painting, film application saves a long waiting time and only takes 1-2 days.

PET Backing Glossy Crystal Morganite Red Car Vinyl Wrap Film can be cut according to the car model to ensure a perfect fit and a seamless effect, which not only enhances the appearance of the entire vehicle, but also provides reliable protection for your car. We offer a variety of sizes and colors to meet different vehicle models and individual needs.


Item Name

WrapMaster PET Backing Super Glossy Crystal Morganite Red Car Vinyl Wrap Film

Performance level
1.52x17M 5x56FT
High flexible polymeric PVC film
Texture Effect
Super Glossy Crystal
Surface Type
Morganite Red Car Vinyl Wrap Film
Air bubble free
PET Liner Air release
Vinyl Type
cast Vinyl
Film thickness (with glue)
Release paper
140g/m2, Silicone coated with air channels
Adhesive thickness
Henkel solvent-based Acrylic-based, repositionable, slidable
Adhesive features
Air-Release, Permanent, Removable
Adhesive type
Adhesive power
Temperature resistance
-40°c to +120°c
Heat temperature
More than +120°c
Tensile strength
Along: min. 19Mpa, Across min 19Mpa
Along: min. 130%, Across: min. 150%
Expected Durability
5 years. Outdoor: 3years
Removable with heat
Application method
Dry Installation
Application method
Dry Installation
Application temperature
+8°C minimum (air and substrate)
Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc.
Application surface
Compound curves, Concave surfaces, Corrugations, Flat, Simple curves
Stretchable, Removable, UV proof, Weatherproof,  Resistant to solvents, Easy cleaning, Easy maintain, Stylish, Can stick anywhere.

Product Advantages

1. Air Release

Seamless, Effortless, Flawless, Impeccable

2. Stretchable

Stretchable enough to wrap around every edge and recessed area of your vehicle with ease.

Stretch does not change color, and does not break.

3. Easy Recovery

If the car film develops wrinkles, it can be efficiently smoothed using a heat gun.

4. Removable

If you want to replace the car film with other colors, it is easy to disassemble and will not damage the original paint of the car, protecting the value of the car.

5. Good Weather Resistance

The glue has good weather resistance, is easy to separate, and does not damage the paint.

Size Guide


Dirt Bike:1.52m*2m(5*6.5ft)

ATV Quad:1.52m*3m(5*9.8ft)







Small SUV:1.52*20M(5*65.6ft)

Large SUV/Sedan:1.52*23M(5*75.4ft)


Pickck Truck:1.52*23M(5*75.4ft)

Small Van:1.52*18M(5*59ft)

Large Van:1.52*25M(5*82ft)

Truck Cab:1.52*18M(5*59ft)

To keep your project running smoothly, we recommend leaving an extra 6-9 feet (2-3 meters) when measuring in case you need extra length during the film application process. This avoids unnecessary delays or expenses due to insufficient materials.


It is recommended to use a viscosity reducer when working with slabs to ensure a smooth process.

The installation process is best done by two people or a small team to improve efficiency and quality.

Avoid overheating the film as this may cause the threads to lift and affect the bonding effect.

During the stretching process, keep the heat below 50 degrees to avoid fading and marks.

When using a scraper, apply a layer of soap and water to the felt to protect the surface and avoid scratches.

Be sure to properly heat treat and cool the film before applying it to the groove to ensure a good fit.

For deep recesses, it is recommended to apply an appropriate amount of adhesion promoter to enhance adhesion.

Before applying vinyl film, be sure to heat it to the recommended temperature for best results