PET Backing Super Glossy Crystal Yugali Cyan Vinyl Wrap Sheets D1011
WRAPMASTER provides a new series of high-quality vinyl in various colors and textures. Each roll size is 1.52*18 meters, which is enough for a private car.
3-layer and high-gloss film;
The surface is glossier than ordinary glossy vinyl;
The PET lining provides a durable protective layer;
Henkel’s solvent-based acrylic adhesive has the characteristics of low viscosity and high-density air guide grooves;
The film can be used for 3-5 years;
It can be used to complete the vehicle and can be partially covered (body, roof, hood, tail, rearview mirror, interior)
Face Only Thickness: 3.7-4.1mil
Adhesive Thickness: 1.6mil
Type of film: High-grade polymeric vinyl plastic release liner film
Adhesive: Henkel solvent-based acrylic adhesive
PVC Face Film:90mic
Release liner: Plastic liner, PET, 75mic
Heat Temperature:-30 to +140 degrees
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Indoor life: 4 years.
Outdoor life: 3 years.
Certification: ISO9001
Dimensional stability: shrinkage of less than 2%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis, and Salt
Conformability: Flat, simple, and moderate compound curves, convex and concave surfaces
Applications: Full Vehicle Wraps and graphics, Architectural Signage, Buses, Cars, Trucks and vans, Mirrors, Bumpers, Hoods, Roofs, Door handles, Vehicle lettering, Interior
trim, Watercraft, Decals and stripes, Accents and trim, Dash panels, Electronics, Skins and more.
Installation Tips:
Application: +16°С to +23°С
Usage From: -30°С to +50°С
Tools: Standard scraper with a soft buffer
Conformability: Smooth and medium curves
Overlap Width: 3-4mm
Dimensional Stability: Shrinkage less than 2%
PET Liner Instructure
Product Advantages
1. Air Release
Seamless, Effortless, Flawless, Impeccable
2. Stretchable
Stretchable enough to wrap around every edge and recessed area of your vehicle with ease.
Stretch does not change color, and does not break.
3. Easy Recovery
If the car film develops wrinkles, it can be efficiently smoothed using a heat gun.
4. Removable
If you want to replace the car film with other colors, it is easy to disassemble and will not damage the original paint of the car, protecting the value of the car.
5. Good Weather Resistance
The glue has good weather resistance, is easy to separate, and does not damage the paint.
Size Guide
Moped:1.52m*3m(5*9.8ft)
Dirt Bike:1.52m*2m(5*6.5ft)
ATV Quad:1.52m*3m(5*9.8ft)
Sportsbike:1.52m*4m(5*13ft)
Mirco:1.52m*10m(5*32.8ft)
Hatch:1.52m*13m(5*42.6ft)
Convertible:1.52*13M(5*42.6ft)
Coupe:1.52*15M(5*49.2ft)
Sedan:1.52*18M(5*59ft)
Small SUV:1.52*20M(5*65.6ft)
Large SUV/Sedan:1.52*23M(5*75.4ft)
MPV:1.52*23M(5*75.4ft)
Pickck Truck:1.52*23M(5*75.4ft)
Small Van:1.52*18M(5*59ft)
Large Van:1.52*25M(5*82ft)
Truck Cab:1.52*18M(5*59ft)
To keep your project running smoothly, we recommend leaving an extra 6-9 feet (2-3 meters) when measuring in case you need extra length during the film application process. This avoids unnecessary delays or expenses due to insufficient materials.
Tips
It is recommended to use a viscosity reducer when working with slabs to ensure a smooth process.
The installation process is best done by two people or a small team to improve efficiency and quality.
Avoid overheating the film as this may cause the threads to lift and affect the bonding effect.
During the stretching process, keep the heat below 50 degrees to avoid fading and marks.
When using a scraper, apply a layer of soap and water to the felt to protect the surface and avoid scratches.
Be sure to properly heat treat and cool the film before applying it to the groove to ensure a good fit.
For deep recesses, it is recommended to apply an appropriate amount of adhesion promoter to enhance adhesion.
Before applying vinyl film, be sure to heat it to the recommended temperature for best results
